Key Features:

Convert To Talk At a Press Of A Button
While a full-featured repeater, the VXR-7000 immediately switches to function in base station mode simply by pressing the Push to Talk Transmit button. Once released, the unit converts back to repeater mode.

Local Or Remote Operating Capability
Controlled by the operator with a press of a button, the VXR-7000 is designed to function as programmed. Or, switch to remote mode and the unit is controlled by instructions received from an external device connected to the accessory connector.

When Safety Counts
The VXR-7000 has DTMF decoding built-in to coordinate with the
Emergency and ANI functions found in Vertex Standard mobile and portable two-way radios. If an Emergency alert is received from a mobile or portable radio, the VXR-7000 will beep loudly and blink the LCD to notify the dispatcher of the emergency alert.

Uninterrupted Power Supply
For uninterrupted operation during power failures, a 12 volt rechargeable battery may be connected. During a power outage, the automatic power control circuit will immediately switch the repeater to the backup battery.

Additional Features
• 16 Channels
• 47 CTCSS tones / 108 DCS codes encode & decode
• 8-Character ANI / ENI ID Display
• CW ID Transmitter
• BCLO, BTLO
• DTMF Encode and decode
• Multi-tone decode / Community repeater (up to 16 tones)
• Time-Out Timer, Hang Timer, Guard Timer
• D-Sub 25 pin accessory connector
• Line interface port

 

 

Vertex Standard VXR-7000 Repeater Specifications

General Specifications
Frequency Range	VHF: 136 - 150 MHz (A), 150 – 174 MHz (C) UHF: 400 – 430 MHz (A), 420 - 450 MHz (BS1), 450 – 480 MHz (D)
Number of Channels	16
Power Supply Voltage	200 / 240 V AC ±10% 50/60 Hz or 13.8 V DC
Channel Spacing	12.5 / 20 / 25 kHz
PLL Steps	VHF: 5.0 / 6.25 kHz UHF: 2.5 / 5.0 / 6.25 kHz
Operating Temperature Range	-25ºC to +55ºC
Frequency Stability	±1.0 kHz
Antenna Impedance	50 Ohms (unbalanced)
Dimension (H x W x D)	325 x 115 x 391.5 mm
Weight (Approx.)	10 kg
Receiver Specification: measured by EN 300 086
Sensitivity 20dB SINAD	-2 dB μV emf
Selectivity	70 dB / 60 dB
Intermodulation	70 dB
Spurious and Image Rejection	57 dBm
Audio Output	4 W @ 4 Ohms 10% THD
Transmitter Specification: measured by EN 300 086
Output Power	5 to 25 W
Duty Cycle	50%
Modulation	16K0F3E, 11K0F3E
Modulation Limiting	±5.0 kHz / ±2.5 kHz
Audio Distortion	< 2.5% @ 1 kHz
Spurious Emission	-36 dBm @ ≤ 1 GHz, -30 dBm @ > 1 GHz