Key Features:

Paging and DTMF ANI Built-In
The VX-160 provides dual 2-tone decode that can be used for two individual pager calls or for a combination of Individual and Group calling. It also includes DTMF ANI that will respond to an incoming ANI burst for selective paging of an individual portable.

High-Speed Scanning Capability
Get unmatched flexibility in scanning features for the price. In addition to basic scan, you also get Priority, Dual Watch and Follow-me scan included.

Solid Audio Output
Designed with 500 mW audio output makes the VX-160 ideal for noisy environments. The high-powered audio is coupled with a large internal speaker, assuring loud and clear audio.

Maximise Battery Life
The VX-160 includes RX/TX (receive and transmit) battery saver capability. During receive, the radio will put itself into saver mode while periodically checking for channel activity. During transmit, the VX-160 will automatically reduce power when the incoming signal is very strong.

Exclusive Auto-Range Transpond System – ARTS™
Only Vertex Standard radios are designed to inform you when you and another ARTS™-equipped station are within communication range. If out of range for more than 2 minutes, your radio senses no signal has been received and beeps to alert you. The base station can then alert the field unit to move back in range. A great solution to keep your workers co-ordinated.

Additional Features
• 16 channel capacity
• CTCSS / DCS Encode and Decode
• 5-Tone Signaling
• BCLO
• BTLO
• TOT
• Radio-to-radio cloning

 

 

Vertex Standard VX-160 Radio Specifications

General Specifications
Frequency Range	VHF: 134 - 160 MHz, 146 - 174 MHz UHF: 400 - 430 MHz, 440 - 470 MHz
Number of Channels	16
Power Supply Voltage	7.5 V DC ± 20%
IP Rating	IP 55
Channel Spacing	12.5/20/25 kHz
PLL Steps	5 / 6.25 kHz
Battery Life (5-5-90 duty) 2000 mAh FNB-V67LI	VHF: 18 hours (14.8 hrs w/o saver) UHF: 15.3 hours (12.8 hrs w/o saver)
IP Rating	IP 54
Operating Temperature Range	-20ºC to +55ºC
Frequency Stability	±2.5 ppm, ± 1.5 kHz
RF Input-Output Impedance	50 Ohms
Dimension (H x W x D)	120 x 58 x 31 mm (w/FNB-67LI)
Weight (Approx.)	320g (w/FNB-67LI, Antenna, Belt Clip)
Receiver Specification measured by EN 300 086
Sensitivity 20 dB SINAD	-4 dB μV emf
Adjacent Channel Selectivity	70 dB
Intermodulation	65 dB
Spurious and Image Rejection	70 dB
Audio Output	500mW @ 4 Ohms 10% THD
Transmitter Specification measured by EN 300 086
Output Power	5 / 1 W
Modulation	16K0F3E, 14K0F3E, 11K0F3E
Conducted Spurious Emissions	70 dB below carrier -36 dBM @ ≤ 1 GHz; -30 dBM @ > 1 GHz
Audio Distortion	< 5 % @1kHz