Key Features:

Expanded Frequency Options for Greater Coverage
Designed to cover the full band in the VHF and upper range of the UHF bands, get wide band coverage in one radio.

Broad Channel Capacity
Get 8 channels for easy operation with the VX-2100 Series or 128 channels for large group communications in the VX-2200 Series to get the job done.

More Scanning Options
Compared to other mobile two-way radios in its class, the VX-2100/2200 Series provides exceptional flexibility in scanning features that is designed to optimise operation for a wide variety of environments. In addition to basic scan, you also get Priority, Dual Watch, Follow-me, Follow-me Dual Watch and Talk Around scanning built-in.

When Safety Counts
The VX-2100/2200 Series comes standard with built-in Emergency alert for enhanced driver safety. A panic button can be triggered by the front panel button to alert the dispatcher when problems arise.

Easily Integrate with Existing MDC System
Add the optional VME-100 board to make VX-2100/2200 mobile radios compatible for use with the rest of your MDC-1200® fleet.

Exclusive Auto-Range Transpond System - ARTS™
Only Vertex Standard radios are designed to inform you when you and another ARTS™-equipped station are within communication range. If out of range for more than 2 minutes, your radio senses no signal has been received and beeps to alert you. The base station can then alert the field unit to move back in range. A great solution to keep your workers coordinated.

Additional Features
• Six programmable keys
• 8-Character alphanumeric display (VX-2200)
• 1-Character numeric display (VX-2100)
• RSSI signal strength indicator
• 2-Tone encode and decode
• 5-Tone signaling
• CTCSS / DCS Encode and Decode
• BCLO, BTLO, TOT
• DTMF Paging
• Stun / kill / revive (5-tone)
• Remote listen
• Lone Worker
• Programmable minimum volume button
• D-Sub 15 Pin accessory connector
• Public address / horn alert
• Radio-to-radio cloning

 

 

Vertex Standard VX-2100/2200 Series Radio Specifications

General Specifications
Frequency Range	VHF: 134 – 174 MHz UHF: 400 – 470 MHz
Number of Channels	128 and 8 Groups (VX-2200) 8 and 1 Groups (VX-2100)
Power Supply Voltage	13.6 V DC ± 15%
Channel Spacing	12.5 / 20 / 25 kHz
PLL Steps	VHF: 2.5 / 5 / 6.25 kHz UHF: 5 / 6.25 kHz
Current Consumption	TX: 6 A RX: 2.5 A, Standby: 200 mA
Operating Temperature Range	–30°C to +60°C
Frequency Stability	Better than ±2.5 ppm
RF Input-Output Impedance	50 Ohms
Dimension (H x W x D)	165 x 45 x 155mm
Weight (Approx.)	1.3 kg
Receiver Specification measured by EN 300 086
Sensitivity 20dB SINAD	-4 dB µV emf / -2 dB µV emf
Adjacent Channel Selectivity	VHF: 75 / 65 dB UHF: 70 / 65 dB
Intermodulation	68 dB
Spurious and Image Rejection	57 dBm
Audio Output	Internal: 4 W @ 18 Ohms, 5% THD External: 12 W @ 4 Ohms, 5% THD
Transmitter Specification: measured by EN 300 086
Output Power	25 / 12.5 / 5 / 1 W
Modulation	16K0F3E, 11K0F3E
Modulation Limiting	±5.0 kHz @ 25 kHz ±4.0 kHz @ 20 kHz ±2.5 kHz @ 12.5 kHz
Spurious Emissions	-36 dBm ≤ 1 GHz, -30 dBm > 1 GHz
Audio Distortion	< 3% @ 1kHz
Hum and Noise	VHF: 50/44 dB UHF: 48/42 dB