Key Features:

Light Weight, High-Capacity Lithium Ion Battery
The VX-1210 includes a 14.8 V Lithium-Ion battery with RX/TX battery saver option that lasts up to 24 hours in receive mode and up to 10 hours in standard SSB operation.

Memory for Large Group Communications
Get 500 channels and alphanumeric labels for each channel for quick and easy call management.

Easy Paging and Calling Options
Using the optional SEL-1200 unit, the VX-1210 supports paging, SELCALL and TELCALL options for fast and flexible communications. Options can be pre-programmed or manually entered for temporary calling requirements.

Integral Noise Blanker
The VX-1210 has a built-in noise blanker capability to improve operation in high noise and areas with significant interference. The noise blanker enhances intelligibility in the presence of vehicular ignition noise and other sources of RF generated impulse noise.

Automatic Antenna Tuning
With the optional ATU-1210 unit installed, simply press and hold the assigned toggle switch to initiate automatic antenna tuning for whip antennas.

Additional Features
• Three programmable keys
• SSB/CW, AM and Data operating modes
• Battery status monitor
• Call alert / Hailer (multiple tones)
• CW Semi break-in
• TOT
• Kill system for unauthorised use (via SELCALL)
• Whip antenna (YHA-61)

 

 

Vertex Standard VX-1210 HF Radio Specifications

General Specifications
Frequency Range	RX: 0.5 – 30 MHz; TX: 1.6 – 30 MHz
Number of Channels	500
Emission Type	A1A(CW); J3E(LSB/USB); H3E(AM); F1B(AFSK)
Emission Type	DC 14.8 V Lithium-ion Battery
Power Requirements	VHF: 2.5 / 5 / 6.25 kHz UHF: 5 / 6.25 kHz
Recharge Time	5 hours (typical)
Channel Spacing	10 Hz
Current Consumption	RX: 500 mA (saver off), 100 mA (saver on) TX: 5 A (20 W), 3 A (5 W)
Operating Temperature Range	-30ºC to +60ºC
Antenna Impedance	50 Ohms (unbalanced)
Dimension (W x H x D)	193 x 74 x 274 mm w/o knobs
Weight (Approx.)	3.2 kg w/FNB-66LI
Receiver Specifications
Circuit Type	Double Conversion Super Heterodyne
Intermediate Frequency	47.055 MHz & 10.7 MHz
Sensitivity	0.25 μV (J3E / A1A, 10 dB S/N)
Selectivity	2.4 kHz / 5.0 kHz (-6/-60 dB)
Clarifier Adjustment Range	±200 Hz (J3E/A1A/F1B), ±400 Hz (H3E)
IF and Image Rejection	80 dB
Audio Output	At least 1.5 W @ 4 Ohms @ 10% THD
Audio Impedance	4 - 32 Ohms
Transmitter Specifications
Output Power	20W / 5W (J3E/A1A/F1B), 10W / 2.5W (H3E)
Duty Cycle	25% voice
Modulation	Balanced Modulator (SSB: J3E) Early Stage / Low Level (AM:H3E)
Carrier Suppression	55 dB
Undesired Sideband Suppression	55 dB @ 1.5 kHz tone
Spurious Emission	-56 dB or better
Audio Response (J3E)	350 - 2650 Hz (-6 dB)
3rd-order IMD	-31 dB
Microphone Impedance	2K Ohms, condenser type